Fiber endface melting fast connector

Model Number:Fast connector
Connector Type:SC/APC
Connector Model:FTTH Fiber Optic Fast Connector
Repeatability:0.2dB
Exchange:0.2dB
Diameter:0.9mm, 2.0mm, 3.0mm, Others
Mode:single mode, multimode
Package:1000pcs/box

Category:

Description

1. Product introduction:

Specially designed for FTTX and ODF data center, easy to operate, can be used repeatedly, no epoxy, no matching gel, no polishing, long-term reliability and high stability. Its optical performance and mechanical performance can compare to the factory pre-embedded fiber optic connectors.

2. Main product features:

1. Applied to 2 × 3 drop cable, Ø2.0 and Ø3.0 indoor cable, 0.9invisible cable;

2. No embedded fiber and no matching gel in the connector, free from temperature changes, long term reliability;

3. Unlimited repeatable assembly, the IL and RL is stable every time;

4. Flexible locking structure, to protect the fiber from damage;

5. Double V groove, high precision, good stability;

6. Visible installation, can check by eyes;

7. Easy to assemble, less than 2 minutes.

3. Product technical data:

Item Paramete
Cable Scope: 3.0 x 2.0 mm Bow-type Drop Cable
2.0/3.0 indoor cable
Fiber Diameter: 125μm ( 652 & 657 )
Coating Diameter: 250μm
Mode: SM
Operation Time: about 15s(exclude fiber presetting)
Insertion Loss: ≤ 0.25dB(1310nm & 1550nm)
Return Loss: ≤ -40dB
Success Rate: 98%
Reusable Times: 10 times
Tighten Strength of Naked Fiber:5 N
Tensile Strength: 50 N
Teperature: -40~+85℃
On-line Tensile Strength Test (20 N):  IL ≤ 0.2dB
Durabiltiy (500 times mating) :  IL ≤ 0.2dB
Drop Test(4m concrete floor, once each direction, three times total) :  IL ≤ 0.2dB

 

 

 

 

 

Close Menu
×